Type St
PD-137 (TYPE ST)
- Volt ohm meter
Note 1: Don't use the 12 pin flexible board of CPC-9 jig.
It causes damage to the unit. Note 2: The old CPC-9 jig (Parts code: J-6082-393-B) cannot be used, because it cannot operate the adjustment remote commander.
[Description on Self-diagnosis Display]
Self-diagnosis display
The camera has a self-diagnosis display. This function displays the camera condition with five-digits (a combination of a letter and figures) on the LCD screen. If this occurs check the following code chart. The five-digits display informs you of the camera's current condition. The last two digits (indicated by □□) will differ depending on the state of the camera.
Self-diagnosis display
You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.)
Contact your Sony dealer or local authorized Sony service facility.
|
Display Code |
Countermeasure |
Cause |
Caution Display During Error |
|
C:04:DD |
Use a NP-FS11/F10 battery pack. |
You are using a battery pack that is not an "InfoLITHIUM" battery pack. |
for "InfoLITHIUM" BATTERY ONLY |
|
C:32:DD |
Turn the power off and on again. |
Trouble with hardware. |
|
Post a comment