Connection Pin Assignments
COMPUTER-RGB/COMPONENT INPUT1, 2 and COMPUTER-RGB/COMPONENT OUTPUT Terminals:
15-pin Mini D-sub female connector
COMPUTER-RGB Input/Output
Component Input/Output
Video input (red)
Video input (green/sync on green) Video input (blue) Not connected Not connected Earth (red)
Earth (green/sync on green) Earth (blue) Not connected GND
Not connected Bi-directional data Horizontal sync signal: TTL level Vertical sync signal: TTL level Data clock
PB (CB) Not connected Not connected Earth (PR) Earth (Y) Earth (PB) Not connected Not connected Not connected Not connected Not connected Not connected Not connected
RS-232CTerminal: 9-pin Mini DIN female connector 8
|
Pin No. |
Signal |
Name |
I/O |
Reference |
|
1. |
Not connected | |||
|
2. |
RD |
Receive Data |
Input |
Connected to internal circuit |
|
3. |
SD |
Send Data |
Output |
Connected to internal circuit |
|
4. |
Not connected | |||
|
3 5. |
SG |
Signal Ground |
Connected to internal circuit | |
|
6. |
Not connected | |||
|
7. |
RS |
Request to Send |
Connected to CS in internal circuit | |
|
8. |
CS |
Clear to Send |
Connected to RS in internal circuit | |
|
9. |
Not connected |
RS-232CTerminal: 9-pin D-sub male connector of the DIN-D-sub RS-232C adaptor (optional accessory: AN-A1RS)
|
it • • i |
o | |
|
J |
|
Pin No. |
Signal |
Name |
I/O |
Reference |
|
1. |
Not connected | |||
|
2. |
RD |
Receive Data |
Input |
Connected to internal circuit |
|
3. |
SD |
Send Data |
Output |
Connected to internal circuit |
|
4. |
Not connected | |||
|
5. |
SG |
Signal Ground |
Connected to internal circuit | |
|
6. |
Not connected | |||
|
7. |
RS |
Request to Send |
Connected to CS in internal circuit | |
|
8. |
CS |
Clear to Send |
Connected to RS in internal circuit | |
|
9. |
Not connected |
RS-232C Cable recommended connection: 9-pin D-sub female connector
|
No. |
Signal |
|
1. |
CD |
|
2. |
RD |
|
3. |
SD |
|
4. |
ER |
|
5. |
SG |
|
6. |
DR |
|
7. |
RS |
|
8. |
CS |
|
9. |
CI |
|
Pin No. |
Signal |
|
1. |
CD |
|
- 2. |
RD |
|
- 3. |
SD |
|
- 4. |
ER |
|
- 5. |
SG |
|
- 6. |
DR |
|
- 7. |
RS |
|
" 8. |
CS |
|
9. |
• Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Pin No. Computer Pin No. |
Post a comment